|
This was designed to fulfil a requirment that our library should already contain. It's an ADA Sink unit with a removable panel for plumbing. Not a cabinet, jut a sink unit that sits about 9" above...
|
11-14-2007
|
125
|
Download
File Size 18.6kB
|
|
|
ADA Vanity 21" Deep Finished Left, Right, Both Or Wall to Wall. Plywood Framed With Exterior To Match Exterior Finish. Various Mid-Support Configurations, Which Work In Most Applications
|
12-18-2007
|
33
|
Download
File Size 53.5kB
|
|
|
ADA Vanity 24" Deep Finished Left, Right, Both Or Wall to Wall. Plywood Framed With Exterior To Match Exterior Finish. Various Mid-Support Configurations, Which Work In Most Applications
|
12-18-2007
|
48
|
Download
File Size 52.4kB
|
|
Well, since we have this product exchange area lets try to use it. Attached you will find a custom counter top I made for a project of mine. It has front-side miter edges and it was configured with the...
|
06-16-2007
|
90
|
Download
File Size 137.1kB
|
|
|
This is a tall cabinet that Lenny helped me with that has a door on the front & back.
|
08-16-2007
|
91
|
Download
File Size 21.1kB
|
|
Custom upper 1 door cabinet with dividers. The dividers have associative dados on the bottom of the cab and the fixed shelf above them. The door also covers the dividers. My first try at this, let me know...
|
02-05-2008
|
18
|
Download
File Size 105.6kB
|
|
Custom upper 1 door cabinet with divisions. The dividers have associative dowel/conformat machining by default (atleast on my setup) on the bottom of the cab and the fixed shelf above them. The door is...
|
02-05-2008
|
17
|
Download
File Size 106.8kB
|
|
this vanity meets ADA requirments. Figures for 1" fillers at wall. Apron and Top have extra 1/4" at wall for scribe. Machining for conframat screws on a 32mm layout. Height, Width and Depth are...
|
12-12-2007
|
44
|
Download
File Size 33.6kB
|