Custom Products

Countertop with Splash Extension & Chamfer

Julie Ball — Wed, 09 Jul 2008 18:48:24 GMT

This is a pretty basic countertop that allows the backsplash to extend left or right, and will chamfer left or right. It also draws in as an 1-1/2" slab, rather than 2 layers of 3/4".

You will need to add a material pointer called "Counter_Top_Slab_Drawing_Only" to your material file(s) and apply a negative sheetstock to it (such as "-1.5" Phantom Material")

Upper 1 Door Cab w/ Divisions

sirroxen — Tue, 05 Feb 2008 18:56:47 GMT

Custom upper 1 door cabinet with divisions. The dividers have associative dowel/conformat machining by default (atleast on my setup) on the bottom of the cab and the fixed shelf above them. The door is set above the division. Let me know if you have any problems with it.

To use, save the .cut file into library folder subdirectory

Upper 1 Door Cab w/ Dividers

sirroxen — Tue, 05 Feb 2008 18:53:55 GMT

Custom upper 1 door cabinet with dividers. The dividers have associative dados on the bottom of the cab and the fixed shelf above them. The door also covers the dividers. My first try at this, let me know if it works well.

To use, save the .cut file into library folder subdirectory

ADA Vanity 21" Deep

kitchen505 — Tue, 18 Dec 2007 16:21:25 GMT

ADA Vanity 21" Deep Finished Left, Right, Both Or Wall to Wall. Plywood Framed With Exterior To Match Exterior Finish. Various Mid-Support Configurations, Which Work In Most Applications

ADA Vanity 24" Deep

kitchen505 — Tue, 18 Dec 2007 16:18:53 GMT

ADA Vanity 24" Deep Finished Left, Right, Both Or Wall to Wall. Plywood Framed With Exterior To Match Exterior Finish. Various Mid-Support Configurations, Which Work In Most Applications

Wall To Wall PLam ADA Vanity

proshop85 — Wed, 12 Dec 2007 23:02:16 GMT

this vanity meets ADA requirments. Figures for 1" fillers at wall. Apron and Top have extra 1/4" at wall for scribe.

Machining for conframat screws on a 32mm layout.

Height, Width and Depth are not adjustable as changes will result in ADA noncompliance.

Over all width is controlled with "product width"

ADA Sink Cover

Jake187 — Wed, 14 Nov 2007 16:40:57 GMT

This was designed to fulfil a requirment that our library should already contain. It's an ADA Sink unit with a removable panel for plumbing. Not a cabinet, jut a sink unit that sits about 9" above the ground. Almost parametric. Current size is standard.

Tall cabinet with doors front & back

Marksman — Thu, 16 Aug 2007 19:15:06 GMT

This is a tall cabinet that Lenny helped me with that has a door on the front & back.

Counter Top w front side miter edges – Freebie

var1 — Sat, 16 Jun 2007 18:19:11 GMT

Well, since we have this product exchange area lets try to use it.

Attached you will find a custom counter top I made for a project of mine. It has front-side miter edges and it was configured with the current global variables and sample tool file.

Any comments are welcome.