Misc.

SpeedBraces by FastCap

olanderd — Fri, 08 Feb 2008 05:04:36 GMT

We use these quite a bit on our jobs so I have created some 3D models of all three sizes that FastCap offers of their SpeedBrace. Just drop them into your drawing and rotate to the correct orientation. I have actually made dynamic blocks that let me rotate and manipulate them, which is even easier, an awesome new feature in ACAD 2007 and above.

Spoilboard Product

Library Administrator — Tue, 08 Jan 2008 18:45:48 GMT

Product used to re-surface your spoilboard. Please post comments and feedback here for possible further development of this product.

Metric.lsp - (transparent)allows metric entry of values during commands

ogb — Fri, 12 Oct 2007 15:05:34 GMT

This lisp routine allows the entry of metric values. For example, start the circle command, Then type in 'mm. A "Value" prompt will appear on your command line. Type in 32 and a 32mm circle will appear(if your circle seeting is "Diameter")

Finished Supports With Blocking And Radius Options

Florida MV Craig — Wed, 26 Sep 2007 14:01:57 GMT

These are two supports most commonly used in Casework construction that are manufactured in shops. We have added blocking options and machining options for most all conditions you run across every day. One of these supports has the radius feature which uses two arcs connected with an angle to allow for one continuous contour banding. Very powerful products and huge time savers. Please let us know what you think on the forums for enhancments and changes you think might make them better.

To use these Supports, you need to make the necessary additions to your library. First, in the material file, add the following Pointers to your Cut Parts

End_Panel_Support_Wet End_Panel_Support_Dry Counter_Top_Supports Counter_Top_Support_Blocking

Add the following pointer to your edge band. End_Panel_Support

Add the following Prompts to your global, under Material Thicknesses

End_Support (Set Value to) =IF(L!Wet_Area_Support=1,OFFSET(M!End_Panel_Support_Wet,0,1,1,1),OFFSET(M!End_Panel_Support_Dry,0,1,1,1))

End_Support_Blocking_Thickness (Set the value to)

=IF(L!Wet_Area_Support=1,OFFSET(M!End_Support_Blocking_Wet,0,1,1,1),OFFSET(M!End_Support_Blocking_Dry,0,1,1,1))

Counter_Top_Support_Thickness (Set Value To) =OFFSET(M!Counter_Top_Supports,0,1,1,1)

Counter Top Support Cleat Thickness (Set Value To) =OFFSET(M!Counter_Top_Support_Blocking,0,1,1,1)